SAKIA ELECTRIC CO.,LTD
Industrial Monitor Solutions Specialist
Add to Cart
Thermal Imaging Furnace monitor system High temperture resistant industrial camera CCTV SLB250 |
Description
The third generation furnace camera adopts special fully enclosed design,it’s waterproof, dust proof and high temperature resistant.easy install,It only needs to drill a Φ 120mm hole on the roof of the furnace shell,and insert the high temperature resistant lens into the furnace.The system uses nitrogen and water to double-cooling the cameradevise to ensure the camera working stably in the high temperature,high pressure, high dust, humidity and corrosive environment.The equipment acquires the image in the furnace by the high-temperature resistant lens of the miniature camera.The CCD chip has the dual functions of visible light and infrared light.The whole material surface distribution image is displayed in real time on the center control room,The camera adopts a wide-angle lens, no need to adjust focus, debugging Convenience.It use for the blast iron furnace above 250 CBM,the system can also be used in other industrial furnaces with high temperature,high humidity and dust. When the furnace charging,the camera recorded all of the process.the flow path and the status of the material surface .in the furnace opening,it record the material movement and distribution ,the distribution of the center air flow, and the furnace phenomenon such as the material collapse ,and the material surface deflection.The features of the equipment is simple installation, convenient maintenance,multiple viewing angle, it is the best choice for high-temperature industrial monitoring in the iron blast furnace . |
| This type of CCTV working in the furnace with temperature under 1200°C and furnace wall thickness less than 300mm.it widely using in the industrial and especially using for the kiln heads and grate coolers of cement factory, coal supply pipes of power plants,The the camera lens enter until the observation hole of the furnace wall,it observe the condition of the workpiece , material running and flame shape in the furnace,When the air supply stopped, the power off, or over temperature, the built-in motor will turned on to return the lens. The design of the airflow distribution is scientific and efficient,in front of the lens is covered by the rotating air curtain,the air curtain is enhanced and sweeping area is increased,this design effectively prevents the dust covering the objective lens in the furnace,so this system can stable and long time working with free maintenance. |
| ITEM | LB250-F | LB250-S |
| Type | Air Cooling | Air&Water Cooling |
| Wall Thickness | 200 | 200 |
| Retraction System | Electric /Pneumatic&Manual | |
| Retraction Distance | 180 | 180 |
| Temperature | Measurement Range | 1200°C |
| Ambient | ≤70°C | |
| Control System | PLC:Automated retraction if air or power is disrupted | |
| Two-Stage:Worksite&Remote | ||
| Install Condition | Borehole size:Φ90mm | |
| Angle of View | Optional | |
| Resolution | 700TVL/1080P | |
| Power Supply | AC220V/12W | |
| Water Supply | Pressure | 0.1-0.5Mpa |
| Min flow | 0.2-0.8m³/h | |
| Air Supply | Temperature | ≤35°C |
| Pressure | 0.2-0.7Mpa | |
| Min flow | 5-10m³/h | |
| Assorted Cable | Vedio | SYVV75-5-1 |
| Power | RVV2X1.0 | |
| Remote control | RVV6X0.5 | |
| Install Distance | Max 15 meters from controller | |
| Optional Accessory | Vortex cooling tube,Remote controller | |