SAKIA ELECTRIC CO.,LTD
Industrial Monitor Solutions Specialist
Add to Cart
Furnace flame monitoring endscope camera with water and air cooling system SL550 |
| This equipment is working in the rugged high temperature environment,such as glass kiln and cement furnaces,it using water and air double protection, can directly extend the camera lens in the kiln,it has automatic enter and return control function with automatic protection,it can clearly observe The bubbling boundary , the glass level and the materials distribution and flame burning statement,The camera and the high-temperature resistant pinhole lens are all installed in the cooling enclosure,in the work status,the lens entered into the furnace,When the air or power interrupted or the temperature is beyond the precaution,the lens will move out of the furnace by the auto return function of the built-in motor.it achieved the centralized scheduling and Automated production technology. The design of the airflow distribution is scientific and efficient,in front of the lens is covered by the rotating air curtain,the air curtain is enhanced and sweeping area is increased,this design effectively prevents the dust covering the objective lens in the furnace,so this system can stable and long time working with free maintenance. |
Description
The third generation furnace camera adopts special fully enclosed design,it’s waterproof, dust proof and high temperature resistant.easy install,It only needs to drill a Φ 120mm hole on the roof of the furnace shell,and insert the high temperature resistant lens into the furnace.The system uses nitrogen and water to double-cooling the cameradevise to ensure the camera working stably in the high temperature,high pressure, high dust, humidity and corrosive environment.The equipment acquires the image in the furnace by the high-temperature resistant lens of the miniature camera.The CCD chip has the dual functions of visible light and infrared light.The whole material surface distribution image is displayed in real time on the center control room,The camera adopts a wide-angle lens, no need to adjust focus, debugging Convenience.It use for the blast iron furnace above 250 CBM,the system can also be used in other industrial furnaces with high temperature,high humidity and dust. When the furnace charging,the camera recorded all of the process.the flow path and the status of the material surface .in the furnace opening,it record the material movement and distribution ,the distribution of the center air flow, and the furnace phenomenon such as the material collapse ,and the material surface deflection.The features of the equipment is simple installation, convenient maintenance,multiple viewing angle, it is the best choice for high-temperature industrial monitoring in the iron blast furnace . |
| ITEM | SL1100 | SL800 | SL550 | SL350 |
| Wall Thickness | 700 | 500 | 300 | 200 |
| Retraction System | Electric /Pneumatic&Manual | |||
| Retraction Distance | 800 | 600 | 400 | 200 |
| Temperature | Measurement Range | 1800°C | ||
| Ambient Enviroment | ≤70°C | |||
| Control System | PLC | Automated retraction if air or power is disrupted | ||
| Two-Stage | Worksite&Remote | |||
| Install Condition | Borehole size:Φ100mm | |||
| Angle of View | Optional | |||
| Resolution | 700TVL/1080P | |||
| Power Supply | AC220V/12W | |||
| Air Supply | Temperature | ≤35°C | ||
| Pressure | 0.2-0.7Mpa | |||
| Min flow | 5-10m³/h | |||
| Water Supply | Pressure | 0.1-0.5Mpa | ||
| Min flow | 0.2-0.8m³/h | |||
| Assorted Cable | Vedio | SYVV75-5-1 | ||
| Power | RVV2X1.0 | |||
| Remote control | RVV6X0.5 | |||
| Install Distance | Max 15 meters from controller | |||
| Optional Accessory | Vortex cooling tube,Remote controller | |||