SAKIA ELECTRIC CO.,LTD
Industrial Monitor Solutions Specialist
Add to Cart
AISI304 stainless steel explosion proof camera anti-static LNG facilities SH19 |
In engineering construction, resource development, such as oil fields,
drilling platforms and other inflammable and explosive areas,sparks or heat of electrical equipment may cause the explosion or fire. In order to prevent explosion,
these components should be installed in a special electrical enclosure, they are called explosion-proof enclosure.According to international explosion-proof standards, these enclosures do not particularly need to withstand external explosions,but are designed to prevent their internal explosions from spreading out of the enclosure.This can prevent a larger explosion, reducing the loss of property and protecting human life.
Compliance with the Essential Health and Safety Requirements has been assured by complIance with EN 60079-0:2012 +A11 2013, EN 60079-1:2014; EN 60079-11:2012, EN 60079-28:2015 and EN 60079-31:2014
FeaturesCertificate: CNEX CE Ingress Grade: IP68 Installation: mounted on ceiling, wall with pan &tilt, brackets AISI316L stainless steel construction sun shield to avoid excessive heating optional accessories such as wipers Strong protection against the elements for most climates Widely used in petrochemical industry, and military industry, etc Multiple Power: 24V AC, 24V DC ,220VAC POE |
| Application Becasue it's forbidden to use the common camera products at high-risk flammable and explosive sites,SAKIA's explosion-proof cameras are backed by rigorous certifications ,they can reliability and effective monitoring the chemical sites, petrochemical and natural gas facilities,food processing plants and coal mines, liquefied gas filling companies, Oil storage, oil fields, offshore,onshore oil rigs, gas station chemical, petrochemical, coal mines, mines, natural gas, chemical plants,flour processing plants, flax processing plants, coal processing plants, fire protection and many other dangerous environments |
Datasheet
| Certificate | |
| Certificate Mark | Exd II C T6 GB/DIP A20 TA, T6 |
| Certificate No | CNEx16.4928 |
| Standards | Q/21392SH17-2016 |
| Mechanical | |
| Housing | Stainless steel 304 or 316L |
| IP | IP68 |
| Cable thread hole | 2pcs G3/4 or NPT3/4 |
| Sun-shield | No |
| Wiper | No |
| Electrical | |
| Voltage | AC85V~AC265V or DC24Vor AC24V |
| Power | 15W/25W (with thermostat) |
| Ambient | |
| Ambient temperature | -25 to +60°C / -45 to +80°C |
| Air pressure | 80Kpa to 106Kpa |
| Relative Humidity | ≦95% (no condensation) |
| Lights | |
| Lights | 0~20m or 20~60m infrared lights |
| Lights Control | Support |
| General | |
| Cable | integrated cable |
| Size | 377*160*178mm (Inner Size:250*80*80mm) |
| Weight | 8.8kg |
| Mounted | wall, pole |
| Wall bracket | SP20 |